Beckett 7505A0000U GeniSys Advanced Oil Burner Control 120V/60Hz 7505A 0000U

Beckett 7505A0000U GeniSys Advanced Oil Burner Control 120V/60Hz 7505A 0000U. BECKETT 7505A0000U. It has 24 Vac thermostat inputs compatible with both on/off and power stealing thermostats. Valve-on delay and motor-off delay timings on all models are programmable with Beckett snap-in programming display. BECKETT 7505A0000U THE BECKETT GENISYS ADVANCED OIL BURNER CONTROL MODEL 7505A0000 *LOCKOUT TIME: 15 SECONDS *VALVE-ON DELAY TIME: N/A *MOTOR OFF DELAY TIME: N/A Valve-on delay and motor-off delay timings on all models are programmable with Beckett snap-in programming display. Other factory set timings are available. Contact Beckett for alternate timings. *FOR CONTROLS WITH ALARM CONTACTS YOU ATTACH THE ALARM CONTACT MODULE WHICH IS SOLD SEPERATELY Product Description The Beckett GeniSys™ Advanced Burner Control is a 120 Vac primary safety control for residential and light commercial oil burners used in boiler, furnace, and water heater applications. The GeniSys is used with a suitable cad cell fl ame sensor to control the oil burner motor, igniter, and optional solenoid valve. It has 24 Vac thermostat inputs compatible with both on/off and power stealing thermostats. It can provide interrupted or intermittent duty ignition, and has a 15-second lockout time. Features & Benefits *Thermostat and boiler control compatible *Programmable valve-on delay and motor-off delay *Three indicator lights for system monitoring and diagnostics *Two communication ports for adding alarm contacts, programming display, and/or future wireless communications *Welded relay protection with redundant motor relays *Limited reset and limited recycle *Sleek, modern design *Cad cell resistance indicator *Technician Pump Prime mode Electrical Ratings Inputs Voltage: 102 to 132 Vac Current: 100 mA plus burner motor, igniter, and valve loads Frequency: 60 Hz Outputs Motor: 120 Vac, 10 full load amps (FLA), 60 locked rotor amps (LRA) Note – Reduce motor FLA rating by igniter load Igniter: 120 Vac, 3 A @ 0.7 PF min Solenoid Valve: 120 Vac, 1 A @ 0.7 PF min Thermostat Anticipator Current: 0.1 mA Thermostat Voltage: 24 Vac Environmental Ratings Storage and Operating Ambient Temperature: -40°F to +150°F (-40°C to +65°C) Moisture: 5 to 95% RH, non-condensing and non-crystallizing Approvals Underwriters Laboratory Recognition per UL372 and UL1998, and CSA-B140.0 REPLACES: HONEYWELL R7184A, R8184G NOTES: *THIS CONTROL IS A 15 SECOND LOCKOUT MAKING IT SAFER THEN THE 45 AND 30 SECOND CONTROLS *FOR CONTROLS WITH ALARM CONTACTS YOU ATTACH THE ALARM CONTACT MODULE WHICH IS SOLD SEPERATELY ALSO REPLACES CARLIN: 48245, 40200 42230, 42230-02S, 42230-02A, 4223002A 50200 Beckett snap-in alarm module required for direct replacement of the Carlin 502001 Click Here. Double your traffic. Get Vendio Gallery – Now FREE!